I. Overview

TDS means Total Dissolved Solid Matter.
TDS: is the English acronym for Total Dissolved Solids, which refers to the concentration of total dissolved substances in water, in milligrams/liter (mg/L), which mainly reflects the concentration of Ca2+ MG2+ Na+ K+ plasma in water, which is different from that of water. The hardness and conductivity have a good corresponding relationship. The smaller the TDS value, the lower the concentration of Ca2+ MG2+ Na+ K+ plasma in the water, and the smaller the conductivity.
Water quality testing: Water is the source of life. Humans are inseparable from water in life and production activities. The quality of drinking water quality is closely related to human health. With social and economic development, scientific progress and the improvement of people's living standards, people's requirements for the quality of drinking water are constantly improving, and the standards for drinking water quality are also constantly developing and improving. Because the formulation of drinking water quality standards is related to people's living habits, culture, economic conditions, scientific and technological development level, water resources and their water quality status and other factors, not only between countries, but also between different regions of the same country, Requirements for drinking water quality vary.

2. Features

1. The tds value is indirectly reflected by measuring the conductivity of water.
2. Easy to use and high precision.

3. Advantages

1. The structure is stable and the processing cost is reduced.
2. The detection process is simple and the detection time is saved.
3. Improve the accuracy of detection data.

4. Application areas

Used in drinking water purification equipment and water storage vessels, such as pure water machines, water dispensers, kettles and all water purification equipment.

5. Product Specifications

Precautions:
1. The power supply voltage must not exceed the TDS range, otherwise the steel needle will be damaged after electrolysis and lead to non-conduction.
2. The installation of the TDS probe is relatively simple, insert it into the two-point or three-point tee, and connect the other side to the circuit.
3. When the TDS probe is used, the power supply must be supplied to the TDS probe when the machine is running, otherwise the steel needle will be electrolyzed.

installation method:
1. Usually, it is inserted into a two-point or three-point tee.